BOSCH  e.Control

The e.Control enables system operators to make efficient use of the energy produced by PV systems, increasing consumption of the power they generate themselves and reducing the amount of power they draw from the grid at the same time. Connecting, for example, a heat pump makes it possible to convert electrical energy into thermal energy and use it at a later point.

  • Steigerung des Eigenverbrauchs durch Steuerung von sichtbaren Verbrauchern z.B. Wärmepumpe
  • Reduzierung des Stromverbrauchs durch höheren Eigenverbrauch
  • Permanente Leistungsreduzierung frei konfigurierbar
  • Kompatibel mit allen Geräten der BPT-S Serie
  • Inbetriebnahme und individuelle Konfiguration via Integrierten Webserver e.Data

Energy-Management:

e.Control enables the energy produced by a system to be used in the optimum way to meet personal requirements. This takes place if there is a surplus of energy by operating additional consumers (e.g. heat pump or heating element) at specific times. This allows the appropriate switch-on values to be configured according to each consumer. The input power can be permanently reduced to between 0 and 100% depending on the energy supplier's requirements. The energy generated continues to be available for personal consumption as well.

High flexibility:

The e.Control is compatible with all inverters in the BPT-S series and can be connected to the inverter either via a switch or directly, meaning that flexible connection options are available. The e.Control has two dry switch contacts for connection to two consumers. If a heat pump (HP) has an interface labelled "SG Ready Smart Heat Pumps", the e.Control can be connected to the HP directly. Alternatively, the two can communicate via an additional "PV contact" module, which can be obtained from the manufacturer of the HP.

Transparency:

Energy flows are displayed transparently in e.Data (web server), e.Web (online portal) and e.UserApp (app). This allows the system operator to call up the system's current status from anywhere at any time.

Easy commissioning

The system can be commissioned and configured extremely easily via the integrated e.Data web server. It is not necessary to install any software for this.